How to Setup Canon Pixma G3200 Wireless Printer?

Canon Pixma G3200 Wireless Setup

you can make use of the following methods for Canon Pixma G3200 Wireless Setup

• WPS connection method.
• Standard connection method.

Further, you can make use of any one of the above methods for Canon Pixma G3200 Wireless Setup

For the WPS method you can proceed with the instructions below:

• Firstly, turn on the printer and keep holding the Settings button for about 5 to 10 seconds.
• After that, press the Fit to Page button.
• And long press the WPS button that you can find on the access point.
• Secondly, make sure that the Wi-Fi light is on.
• If the Wi-Fi light is, flashing it means that the printer is connected to the wireless network.
• That's all, the wireless setup connection is now complete.

Further to confirm the network settings, begin with the following steps:

• Firstly, ensure that the printer is on.
• Fan a stack of paper and load it on the input tray.
• Long press the Resume of the Cancel button till you see the alarm LED flashing up to 15 times.
• After that, release the Resume or the Cancel button
• And finally, this will print the Network configuration page.

You can also contact our technical team@+1-844-982-4357 for further information regarding the Canon Pixma G3200 Wireless Setup and installation